Share:


Obaproof CM-700WP



Obaproof CM-700WP

Cement Modifier & Waterproofing Primer

Obaproof CM-700WP is a multi-functional styrene-acrylic copolymer liquid emulsion modified with MMA and butadiene. Formulated as a high-performance bonding agent, primer, and mortar modifier, it penetrates and seals capillary pores to significantly improve bond strength, water tightness, and concrete durability.

Packing: 1kg / 4kg / 20kg
Form: Liquid
Color: White

Product Overview
An advanced, multi-purpose liquid copolymer designed to upgrade regular cementitious mixtures and prime porous concrete surfaces before waterproofing. When incorporated into mortars, it densifies the mix structure to maximize flexural strength and reduce permeability. When used as a permeable primer, it consolidates chalky surface dust and locks down the substrate for maximum inter-coat adhesion.

Key Advantages
  • Superior Adhesion & Bonding: Increase tensile bond strength between concrete, renders, and waterproffing layers.
  • Pore-Sealing & Impermeability: Fills concrete micro-pores to prevent moisture osmosis, cement aging, and reinforcement bar corrosion.
  • Damp Surface Compatible: Applies smoothly onto dry, damp, or wet mineral substrates without bubbling or peeling.
  • Eco-Friendly & Safe: Water-based, non-flammable, non-corrosive, low VOC, odourless, and non-toxic.

Recommended Applications
  • Waterproofing primer for liquid-applied membranes (PU, acrylic, and bituminous systems)
  • Bonding slurry/ agent between existing and fresh concrete
  • High-strength, crack-resistant floor screeds and renders
  • Structural repair mortars, patching compounds, and angle fillets
  • Manhole linings and precast joint treatments

Coverage and Mixing Proportions
  • As a Waterproofing Primer / Bonding Slurry
    • Dilute 1 part Obaproof CM-700WP to 3 parts clean water by volume. Plaster or roll evenly onto the prepared surface (approximate 0.2kg / m2 dilute)
  • As a Cement / Mortar Modifier (Patching, Repair & Rendering)
    • ​​​​​​​Cement: 50kg
    • Clean Sand: 150kg
    • Obaproof CM-700WP: 5kg
    • Water: 15kg

Application & Working Guidelines
  • Surface Preparation: All substrates must be sound, clean, and completely free from dirt, mold, grease, oil, and loose contaminants that could impair adhesion.
  • Priming Work: Stir the 1:3 water dilution thoroughly. Apply an even, continuous coat using a roller, brush, or spray. Allow to penetrate and cure to a tack-free finish (approximate 30 minutes) before applying subsequent waterproofing layers or toppings.
  • Mortar Mixing: Pre-blend dry sand and cement. Add the gauged liquid mixture of CM-700WP and water into a mechanical mixer and blend until a uniform, lump-free workable consistency is achieved.
  • Application Temperature: Minimum ambient and substrate temperature of 5°C.
  • Clean-up: Tools and equipment can be cleaned with clean water immediately after use. Cured product requires mechanical removal.

Storage & Safety
  • Shelf Life: 12 months from manufacture date, unopened packaging stored in a cool and dry area.
  • Safety Precautions: Wear protective rubber gloves and safety goggles during handling. In case of eye contact, rinse immediately with clean running water and consult a physician. For skin contact, clean immediately before the material dries using soap and water. Keep away from children.


 Inquiry - Obaproof CM-700WP