Share:


PENTENS T-200



PENTENS T-200

UV Resistant Elastromeric Waterproofing Coating

PENTENS T-200 is a single-component, acrylic polymer elastomeric waterproofing coating formulated for outstanding hardness, elasticity, and long-term durability. It forms a seamless, weather-proof protective barrier designed specifically for exposed outdoor roofs, decks, and external structures.

Packing: 20kg / 200kg (also available in smaller consumer sizes)
Form: Liquid (cross-linking copolymer emulsion)
Color: Grey, White, Green, Yellow, etc.

Product Overview
An advanced, one-part PU-acrylic cross-linking elastomeric membrane engineered to withstand severe outdoor weathering, intense solar radiation, heat, and ozone degradation. It combines flexible crack-bridging capability with tough surface hardness, providing an impermeable, walkable barrier that resists blistering, chalking, and premature aging.

Key Advantages
  • Superior UV & Weather Resistance: Built-in UV blockers resist extreme heat, sunlight, and ozone without peeling, blistering, or cracking.
  • Flexible at Low Temperatures: Retains elastromeric properties and movement capability across wide temperature fluctuations.
  • Chemical & Gas Barrier: Resists gas permeation, oil spills, light chemicals, and environmental pollutants.
  • Eco-Friendly & Safe: Water-based, low VOC, odorless, non-toxic, and user-friendly to apply across various substrates.

Recommended Applications
  • RC flat roofs, concrete roof decks, and floor slabs
  • RC gutters and planter boxes
  • Metal profile and zinc roofing
  • External builing facades, parapets, and concrete structures
  • Wood sliding, timber decking, and wood fencing

Coverage Rates
  • Floors, Decks & RC Roofs: ~0.75kg to 1.0kg/m² per coat (approx. 1.5kg to 2.0kg/m² across 2 neat coats)
  • Vertical Walls & Facades: ~0.5kg/m² per coat (approx. 1.0kg/m² across 2 coats)
A minimum of 2 coats is recommended over a primed surface. In high-movement joints, an embedded reinforment mest/fleece layer is advised.

Application & Working Guidelines
  • Surface Preparation:  Substrates must be solid, clean, dry, and cleared of dust, moss, oil, grease, and loose coatings. Repair structural cracks and honeycombing prior to coating.
  • Priming: Dilute 1 part PENTENS T-007 with 3 parts clean water and apply a thin priming coat at 0.2kg/m2. Allow to dry for approximate 30 minutes.
  • Mixing & Tooling:  Stir thoroughly before use. Apply evenly using a brush, long-nap roller, or airless spray equipment.
  • Recoating Interval: Apply the first coat undiluted and allow 4 to 8 hours drying time before applying the second coat crosswise (perpendicular to the first layer).
  • Working Conditions: Apply within an ambient and substrate temperature range of 8°C to 40°C. Do not apply if rain or high moisture condensation is expected within 24 hours.
  • Clean-up: Tools and equipment can be cleaned with clean water immediately after use. 

Storage & Safety
  • Shelf Life: 12 months from manufacture date in original, unopened, and undamaged sealed pails.
  • Storage Conditions: Store in a ventilated, shaded, and dry environment.
  • Safety Precautions: Non-toxic water-based formulation. Standard PPE (gloves, eye protection, and protective masks) should be worn during application. In case of skin or eye contact, rinse thoroughly with clean water. Keep out of reach of children.


 Inquiry - PENTENS T-200