Share:


PENTENS T-007 Pro Blue



PENTENS T-007 Pro Blue

High-Performance Water-Based Primer & Bonding Agent

PENTENS T-007 PRO BLUE is a rapid-curing, water-based primer and bonding modifier engineered for multi-surface adhesion. Designed with a distinctive blue indicator, it creates an exceptionally strong chemical and mechanical bond across diverse substrates including concrete, tiles, timber, metal, and insulation panels .

Packing: 5kg / 20kg
Form: Liquid
Color: Light Blue

Product Overview
A next-generation, quick-dry liquid polymer primer formulated to maximize bonding performance before waterproofing, rendering, or floor coating applications. Its high-wetting capability allows deep pore penetration into porous concrete and creates an adhesion bridge on smooth, dense surfaces like existing ceramic tiles. When added to cementitious mixes, it dramatically boosts impact resistance, flexural strength, and moisture tightness.

Key Advantages
  • Rapid Curing & Ready to Use: Fast drying times allow faster recoat windows and minimize project downtime
  • Visual Coverage Indicator:  Light blue tint ensures applicators can easily confirm continuous, gap-free coverage without missed spots
  • Multi-Substrate Adhesion:  Bonds tenaciously to new and old concrete, glazed ceramic tiles, timber, metals, and insulation foams
  • Mechanical Strength Booster: Increases tensile, compressive, flexural, and impact strength when blended into repair mortars and renders
  • Eco-Friendly & Safe:  Water-based, non-toxic, low odor, and certified suitable for use around potable water structures

Recommended Applications
  • High-performance primer for water-based waterproofing membranes and floor coatings
  • Direct bonding agent for tiling over existing ceramic tiles (tile-on-tile)
  • Bonding interface between old and freshly poured concrete
  • Concrete repairs in potable drinking water reservoirs and wastewater treatment facilities
  • Heavy-duty resurfacing of factory floors, driveways, ramps, and angle fillets (coving)

Coverage and Mixing Proportions
  • As a Waterproofing Primer / Bonding Coat
    • Dilute 1 part PENTENS T-007 Pro Blue to 3 parts clean water (1:1 ratio by volume). Coverage: ~0.15kg to 0.25kg/m² (depending on substrate porosity).
  • As a Tile-on-Tile / Smooth Surface Primer:
    • Apply neat or mixed 1:1 with water, or blend with Portland cement to form a high-tack bonding slurry.
  • As a Mortar Modifier (Patching & Screeding):
    • Add directly into cement-sand mortar mixtures to replace part of the gauging water for enhanced adhesion and flexural toughness

Application & Working Guidelines
  • Surface Preparation: All substrates must be sound, clean, and completely free from dirt, mold, grease, oil, and loose contaminants that could impair adhesion.
  • Priming Work:  Pre-mix PENTENS T-007 PRO BLUE with clean water at a 1:1 ratio until fully uniform. Apply an even, continuous coat using a roller, brush, or spray. 
  • Recoating: Allow the primer to dry to a clear-blue, tack-free film before proceeding with waterproofing membranes, adhesives, or cementitious toppings.
  • Clean-up: Wash all tools and application equipment with clean water immediately after use. Cured material can only be removed mechanically.

Storage & Safety
  • Shelf Life: 12 months from manufacture date, unopened packaging stored in a cool and dry area.
  • Store Condition: Store in a cool, ventilated, and dry area away from direct sunlight and frost.
  • Safety Precautions: Standard PPE (gloves, eye protection, and protective clothing) should be worn during application. In case of contact with eyes, rinse immediately with plenty of clean water and seek medical attention if irritation persists. Keep out of reach of children.


 Inquiry - PENTENS T-007 Pro Blue