Share:


TEKBOND Gutter & Roof



TEKBOND Gutter & Roof Sealant & Adhesive

All-Weather Waterproofing Barrier for Roofing, Gutters, and Drainage System

TEKBOND Gutter & Roof is an advanced neutral-cure hybrid sealant and adhesive specially engineered to protect vulnerable joints, seams, and penetrations against water infiltration. Formulated for demanding outdoor environments, it forms an elastomeric, watertight seal capable of absorbing continuous thermal expansion, building vibration, and joint movement.

With high resistance to intense UV radiation, heavy rainfall, and temperature fluctuations, TEKBOND Gutter & Roof prevents costly water damage, rust, and leaks across metal roofs, rainwater drainage systems, and exterior building envelopes.


Key Features

  • High-Performance Waterproofing:  Creates a durable barrier against wind-driven rain, standing water, and moisture penetration
  • Non-Corrosive Neutral Formulation: Safe for direct contact with bare and coated metals—will not corrode galvanized iron, zinc, aluminum, or steel fastener
  • High Flexibility: Accommodates dynamic structural movement and thermal contraction/expansion without cracking, shrinking, or pulling away from edges
  • UV & Weather Resistant: Formulated to withstand intense sunlight, oxidation, and weathering without degrading or becoming brittle
  • Paintable Finish: Can be coated over with standard exterior paints once fully cured to match the building exterior

Recommend Applications
  • Rainwater Management: Sealing downpipes, gutters, spouting, end caps, lap seams, and drainage connections.
  • Roofing & Flashings: Sealing ridge caps, valley gutters, roof flashing, chimney aprons, vent penetrations, and corrugated roof sheets
  • Awnings & Skylights: Weatherproofing perimeter joints around polycarbonate sheets, acrylic skylights, and patio canopies
  • General Exterior Maintenance: Sealing cracks and connection gaps between metal framework, masonry, concrete parapets, and exterior wall cladding

Compatible Substrates
  • Wood & Composites: Treated timber fascia boards, plywood underlayment, and composite panels
  • Mansory & Stone: Concrete, cement boards, unglazed/glazed roof tiles, brick, and natural stone
  • Metals: Galvanized iron, zinc-coated steel, aluminum, stainless steel, and color-coated metal roof sheets
  • Plastics: Rigid PVC gutters, downspouts, polycarbonate, and acrylic awnings

Application Instructions
  • Surface Preparation: Ensure all contact surfaces are clean, dry, and free from grease, oil, dust, or loose flaking material
  • Dispensing: Cut the cartridge tip above the thread, attach the V-notch nozzle, and load into a standard caulking gun
  • Application: Apply adhesive in vertical beads. Avoid applying in closed loops or circular blobs to allow air circulation for proper curing
  • Tooling: Smooth and tool the joint within 10 minutes using a sealant spatula or a gloved finger lightly moistened with a neutral tooling solution
  • Curing: Allow 24 hours of curing before painting or exposing to severe mechanical loads


 Inquiry - TEKBOND Gutter & Roof