Share:


PENTENS T-200 Pro Fiber



PENTENS T-200 Pro Fiber

Ultimate Elastic Acrylic Waterproofing Coating

PENTENS T-200 PRO FIBER is a high-grade, single-component elastomeric waterproofing coating formulated from styrene-acrylic copolymers and integrated with micro-fiber reinforcement. It cures into a flexible, tough, and seamless protective membrane engineered for both exposed outdoor and internal areas. 

Packing: 5kg / 20kg
Form: Emulsion Liquid
Color: Grey / White

Product Overview
An advanced, fiber-reinforced elastomeric liquid membrane designed to provide superior tensile strength, thermal movement accommodation, and weatherproofing protection. By incorporating integral fibers directly into the polymer matrix, it bridges micro-cracks and absorbs structural expansion and contraction without requiring separate mesh installation in general areas. It delivers high solar reflectance, extreme UV stability, and monolithic protection across diverse building substrates.

Key Advantages
  • Superior UV & Weather Resistance:  Reflects harsh sunlight and resists severe weather degradation, reducing heat transfer into building structures without chalking or peeling.
  • Intergral Fiber Reinforment: Built-in micro-fibers distribute stress evenly, significantly enhancing tensile strength and tear resistance while maintaining high elasticity.
  • Wide Substrate Versatility: Bonds tenaciously to concrete, cement tiles, metal/zinc sheets, asphalt coatings, timber, polystyrene foam, and fiber-cement surfaces.
  • Eco-Friendly & Safe: Water-based, low VOC, odorless, non-toxic, and user-friendly to apply.

Recommended Applications
  • Exposed concrete flat roofs, concrete roof decks, and floor slabs
  • RC gutters, parapet walls, and external building facades
  • Metal profile, zinc roofing, and asbestos sheets
  • Balconies, terraces, and wet areas
  • Precast flat concrete, barrel cement tiles, and concrete structures

Coverage Rates
  • Exposed Roofs, Decks & Slabs: ~0.75kg to 1.0kg/m² per coat (approx. 1.5kg to 2.0kg/m² across 2 neat coats)
  • Vertical Walls & Facades: ~0.5kg/m² per coat (approx. 1.0kg/m² across 2 coats)
A minimum of 2 coats is recommended to form a complete waterproofing membrane layer.

Application & Working Guidelines
  • Surface Preparation:  Substrates must be solid, clean, dry, and cleared of dust, moss, oil, grease, and loose coatings. Repair structural cracks and honeycombing prior to coating.
  • Priming: Dilute 1 part PENTENS T-007 with 3 parts clean water and apply a thin priming coat at 0.2kg/m2. Allow to dry for approximate 30 minutes.
  • Mixing & Tooling:  Stir thoroughly before use. Apply evenly using a brush, long-nap roller, or airless spray equipment.
  • Recoating Interval: Apply the first coat of PENTENS T-200 Pro Fiber evenly across the surface. Allow approximately 8 hours of drying time before applying the second coat crosswise (perpendicular to the first layer).
  • Working Conditions: Do not apply if rain, excessive moisture, or standing condensation is imminent within 24 hours. Ensure outdoor roofs have adequate slope/drainage to prevent permanent water ponding.
  • Clean-up: Tools and equipment can be cleaned with clean water immediately after use. Cured material must be removed mechanically. 

Storage & Safety
  • Shelf Life: 12 months from manufacture date in original, unopened, and undamaged sealed pails.
  • Storage Conditions: Store in a ventilated, shaded, and dry environment.
  • Safety Precautions: Non-toxic formulation. Standard PPE (gloves, eye protection, and protective masks) should be worn during application. In case of skin or eye contact, rinse thoroughly with clean water. Keep out of reach of children.


 Inquiry - PENTENS T-200 Pro Fiber