Share:


MAPEI Mapegrout Patch 218



MAPEI Mapegrout Patch 218

Fibre-Reinforced Patch Repair Mortar

MAPEI Mapegrout Patch 218 is a pre-blended, single-component cementitious patch repair mortar reinforced with synthetic fibres. Developed with graded aggregates and special additives, it provides a high-strength, non-shrink, and thixotropic repair solution for damaged concrete surfaces without the need for formwork.

Packing: 5kg / 20kg
Form: Powder
Color: Grey

Product Overview
A fast-setting, fibre-reinforced structural patch repair mortar engineered for vertical, overhead, and horizontal concrete restoration. Formulated with controlled-shrinkage technology and synthetic micro-fibres, it bonds tenaciously to sound concrete, prevents shrinkage cracking, and provides high compressive and flexural strength for rapid structural turnarounds.

Key Advantages
  • Fiber-Reinforced & Non-Shrink: Integrated synthetic fibres and shrinkage-compensating additives minimize cracking and provide long-term volumetric stability.
  • High Mechanical Strength: Exceptional flexural and compressive strength designed to withstand structural loads and environmental stresses.
  • Superior Adhesion: Excellent bond strength to properly prepared, roughened concrete surfaces.
  • Easy Application: Easily shaped and finished with a trowel without slumping, eliminating the need for shuttering/formwork on vertical and overhead repairs.
  • Fast Drying: Accelerates project schedules, enabling quicker overcoating and site progress.

Recommended Applications
  • Patch repairing damaged or spalled concrete on columns, beams, walls, and slabs
  • Restoring honeycombed concrete and structural concrete defects
  • Overhead and vertical patch repairs without formwork
  • Repairing concrete corners, joint edges, and balcony perimeters prior to waterproofing works

Coverage Rates
  • Water Ratio: 3.5 kg to 4.0 kg of clean water per 25 kg bag (approx. 14%–16% by weight, adjusted to desired workable consistency). For a 5kg bag, use approximately 0.7 kg to 0.8 kg of water.
  • Consumption: Approx. 1.85 kg/m² per mm of thickness (approx. 18.5 kg/m² at 10 mm thickness).

Application & Working Guidelines
Surface Preparation:
  • The concrete substrate must be structurally sound, clean, and free of oil, grease, paint, laitance, and loose particles.
  • Do not apply on smooth concrete; thoroughly roughen the surface by mechanical scarifying, chipping, or bush-hammering.
Mixing:
  • Pour measured clean water into a clean mixing container.
  • Gradually add Mapegrout Patch 218 powder into the water while stirring continuously with a low-speed mechanical mixer for 3 minutes.
Application:
  • Apply the mixed mortar directly to the damp, roughened substrate using a flat or gauging trowel. Press firmly to ensure complete contact and bond.
  • When multiple layers are required to build up thickness exceeding 30 mm, apply the subsequent layer before the preceding layer has completely set (wet-on-wet / stiffened state).
Curing:
  • Apply within an ambient and substrate temperature range of +5°C to +35°C.

Storage & Safety
  • Shelf Life: 12 months from manufacture date in original, unopened, and undamaged sealed pails.
  • Storage Conditions: Store elevated off the ground in a dry, covered, and moisture-free environment.
  • Safety Precautions: Contains cement which reacts alkaline with moisture and may cause skin or eye irritation. Wear protective rubber gloves, dust masks, and safety goggles during handling and mixing. In case of eye contact, rinse immediately with generous amounts of clean running water and consult a physician. Keep out of reach of children.


 Inquiry - MAPEI Mapegrout Patch 218