MAPEI Mapeflex AC-P Paintable Acrylic Sealant
Textured "Render-Effect" Sand Finish for Seamless Wall, Joint, and Crack Sealing
MAPEI Mapeflex AC-P is a one-component, water-dispersed acrylic sealant formulated for sealing internal and external construction joints, expansion joints, and surface cracks on absorbent building materials.
Formulated with specially graded white mineral aggregates, it cures to a subtle, sand-textured "render-effect" finish that blends naturally into rough or coarse surfaces such as cement render, concrete, and exposed brickwork.
Key Features
- Seamless "Render-Effect" Finish: Special white aggregates replicate coarse plaster and render textures, preventing smooth, shiny joint lines from standing out on textured walls
- Paintable Surface: Easily overpainted with standard wall paints once cured to achieve an invisible repair
- Medium Movement Capability: Accommodates joint movement up to 12.5% of the joint width without cracking or detaching
- All-Weather & UV Stability: Withstands prolonged outdoor exposure, UV rays, industrial environments, and service temperatures from -30ºC to +80ºC
- Non-Slump Thixotropic Paste: Smooths cleanly with a trowel or spatula on vertical walls, ceilings, and horizontal joints
- Damp-Surface Tolerance: Adheres reliably to porous substrates even if slightly damp
Recommend Applications
- Wall Cracks & Surface Repairs: Filling and sealing accidental shrinkage or settlement cracks in interior and exterior vertical walls
- Precast & Panel Joints: Sealing expansion and construction joints between prefabricated concrete panels, plasterboard, and timber partition walls (up to 12.5% movement)
- Doors & Window Perimeters: Creating air- and watertight seals around wooden window frames, door casings, window sills, and roller-blind housings
- Exterior Cladding: Forming fillet seals around ledges, stringcourses, wall-to-ceiling junctions, and external thermal cladding systems
Compatible Substrates
- Mansory & Mineral Surfaces: Cement render, plaster, poured concrete, precast concrete, cellular concrete, exposed brick, and natural stone
- Wood & Drywall: Timber frames, wooden panels, plasterboard (gypsum), and insulating board
Application Instructions
- Surface Preparation: Ensure all contact surfaces are clean, dry, and free from grease, oil, dust, or loose flaking material.
- Dispensing: Cut the cartridge nozzle at a 45-degree angle to match the joint width and apply evenly using a standard caulking gun.
- Finishing: Smooth the surface within 10-15 minutes using a wet spatula or trowel to bring out the uniform sand-textured finish.
Inquiry - MAPEI Mapeflex AC-P