SikaWall®-603 Acrylic
Ready-to-Use Acrylic Skim Coat for Smooth Wall Finishing
SikaWall®-603 Acrylic is a ready-to-use acrylic-based skim coat formulated with synthetic resin, mineral fillers and special admixtures. It is designed to level uneven surfaces and repair minor imperfections in concrete, plaster and drywall substrates, providing a smooth and uniform finish ready for painting.
With excellent trowelability and a white smooth finish, this acrylic skim coat helps eliminate surface defects such as grooves, seams, fine cracks and blowholes. Its good weather resistance also makes it suitable for exterior wall applications when properly finished with paint.
Suitable Applications
Interior and Exterior:
-
Concrete walls and columns
-
Reinforced concrete surfaces
-
Concrete soffits and ceilings
-
Cast-in-situ concrete
-
Precast concrete panels
-
Acotec panels
Interior Only:
-
Lightweight block plaster
-
Brickwall plaster
-
Gypsum boards
-
Cement boards
-
Plasterboards and other suitable drywall surfaces
Key Features
-
Ready-to-Use Formulation: No additional mixing or water required.
-
Smooth White Finish: Creates a flat and uniform surface for subsequent painting.
-
Excellent Trowelability: Easy to spread, level and smooth using a stainless steel trowel.
-
Surface Defect Repair: Helps fill minor grooves, seams, fine cracks and blowholes.
-
Flexible Application Thickness: Suitable for application thicknesses from 0.3mm to 4.0mm.
-
Overpaintable: Can be coated with suitable paint after proper curing.
-
Good Weather Resistance: Suitable for interior and exterior wall applications.
-
Time and Cost Saving: Convenient ready-to-use formulation simplifies application.
Technical Specifications
-
Product Type: Acrylic-based ready-to-use skim coat
-
Colour: White paste
-
Packaging: 5kg pail / 25kg pail
-
Application Thickness: 0.3–4.0mm
-
Consumption: Approximately 1.8kg/m² per mm thickness
-
Tensile Adhesion Strength: Approximately 1.3 N/mm² at 28 days
-
Curing Time: 24–48 hours, depending on thickness and ambient conditions
-
Overcoating Time: Approximately 2 hours at 20°C
Achieve smoother walls and ceilings with SikaWall®-603 Acrylic. Contact One Stop Paint Centre for product enquiries and assistance.
Inquiry - SikaWall®-603 Acrylic