Share:


MAPEI Mapeflex MS 45



MAPEI Mapeflex MS 45 Hybrid Sealant & Adhesive

High-Modulus, Paintable Silylated Polymer Sealant & Adhesive

MAPEI Mapeflex MS 45 is a professional, one-component, fast-hardening hybrid sealant and adhesive formulated from advanced silylated polymers (MS technology). Engineered with a high modulus of elasticity and strong initial grab, it delivers durable elastic sealing and structural bonding across both interior and exterior building applications.

Unlike conventional sealants, Mapeflex MS 45 is compatible with damp and wet substrates during application without blistering or losing adhesion, and it is certified for contact with drinking water.


Key Features

  • Wet & Damp Substrate Compatible: Adheres reliably even on damp or wet surfaces without bubbling, making it dependable for humid environments and urgent moisture-area repairs
  • Certified for Drinking Water Contact: Tested and certified safe for joints and assemblies in contact with potable water
  • 2-in-1 Elastic Sealant & Structural Adhesive: Accommodates joint movement up to 20% while providing high mechanical strength and initial grab on walls and ceilings
  • Heavy-Duty Traffic & Weather Resistance: Suitable for civil and industrial floors exposed to heavy vehicular traffic, as well as exterior façades exposed to UV rays
  • Paintable & Dirt-Resistant Finish: Cures to a smooth, mould-resistant surface that minimizes dirt pickup and can be painted over with flexible exterior or interior paints
  • Eco-Friendly & Low Odor: Free from silicones, solvents, and isocyanates, with EMICODE EC1 R Plus certification for very low volatile organic compound (VOC) emissions.

Recommend Applications
  • Expansion & Construction Joint: Sealing horizontal and vertical expansion, fillet, and distribution joints subject to movements up to 20% of the joint width
  • Industrial & Commercial Flooring: Sealing floor joints in warehouses, workshops, and walkways subjected to pedestrian and heavy vehicular traffic
  • Facades, Doors & Windows: Weatherproofing traditional and ventilated façades, window and door perimeters, cracks, and paintable joints
  • Roofing, Metalwork & Wet Areas: Sealing metal roofs, sheet metalwork, gutters, and damp building joints
  • Flexible Construction Bonding: Elastic bonding (up to 3 mm thickness) of skirting boards, panels, sills, trims, and architectural fixtures—replacing or supplementing mechanical fasteners

Compatible Substrates
  • Mansory & Mineral Surfaces: Concrete, cement-based screeds and renders, brick, natural stone, ceramic, and klinker
  • Metals: Steel, galvanized steel, aluminum, and copper
  • Glass & Interiors: Float glass, mirrors, gypsum boards, and painted surfaces
  • Wood & Drywall: Timber frames, wooden panels, plasterboard (gypsum), and insulating board

Application Instructions
  • Surface Preparation: Ensure all contact surfaces are clean, dry, and free from grease, oil, dust, or loose flaking material.
  • Dispensing: Cut the cartridge nozzle at a 45-degree angle to match the joint width and apply evenly using a standard caulking gun.
  • Finishing: Smooth the surface within 35 minutes using a wet spatula or trowel to bring out the uniform sand-textured finish.
  • Bonding Mode: When using as a flexible adhesive, apply in spots or beads no thicker than 3 mm and press parts firmly together within 20 minutes. Heavy vertical or overhead items may require temporary support for the first 24 hours.
  • Painting & Compliance Note: Allow the sealant to polymerize completely before overpainting. 


 Inquiry - MAPEI Mapeflex MS 45