MAPEI KERACOLOR SF
Fine-Grained High Performance Cementitious Tile Grout
MAPEI Keracolor SF is a pre-blended, fine-grained polymer-modified cementitious mortar designed for grouting narrow tile joints up to 4 mm wide. Formulated with selected ultra-fine aggregates and special additives, it cures to form a smooth, compact, and durable finish for both interior and exterior tiled surfaces.Packing: 2kg / 5kg / 20kg
Form: Fine Powder
Product Overview
A high-performance, fine-textured cementitious grout engineered for sleek, narrow joints where smoothness and aesthetic precision are essential. Suitable for walls and floors across residential and commercial projects, it cures without shrinkage cracks and offers strong resistance to mild acids and surface wear. When mixed with MAPEI Fugolastic polymeric admixture instead of water, its mechanical strength and water resistance are further upgraded for heavy-duty and submerged environments.
Key Advantages
- Ultra-Fine & Smooth Finish: Fine-grained mineral formulation produces a compact, sleek, and uniform joint surface ideal for narrow gaps up to 4 mm.
- Crack-Free & Durable: Shrinkage-compensated formula prevents hairline cracking while delivering high compressive and abrasion resistance.
- Easy Workability & Clean-Up: Creamy paste consistency spreads effortlessly into joints and wipes clean easily from tile faces without scratching.
- Acid & Weather Resistant: Good resistance to mild household acids and suitable for both interior and exterior installations.
Recommended Applications
- Internal and external grouting of floors and walls
- Porcelain, ceramic, vitreous, and terracotta tiles
- Natural stone, marble, granite, and pre-finished marble mosaics
- Glass mosaics and decorative wall tiles
Coverage & Mixing Proportions
- Mixing Ratio: Approx. 30% clean water by weight
- Joint Width: Designed specifically for narrow joint up to 4 mm
- Consumption: Varies depending on tile dimensions, tile thickness, and joint width (typically ~0.2kg to 0.5 kg/m² for standard wall/floor tiles).
Application & Working Guidelines
Surface Preparation:
- Ensure tile adhesives or mortars have completely cured before grouting. Joints must be clean, dry, free of dust, excess adhesive, and scraped out to a uniform depth of at least 2/3 of the tile thickness.
- Pour measured clean water into a clean mixing container.
- Gradually add MAPEI Keracolor SF powder while stirring with a low-speed mechanical mixer until a smooth, lump-free, homogeneous paste is achieved. Let the mix stand for 2 to 3 minutes, then stir briefly again before applying.
- Fill the joints completely using a hard rubber grout float, working diagonally across the tiles to ensure no voids or gaps remain. Remove excess grout from the tile surface while still fresh using the edge of the float.
Cleaning & Finishing:
- Polish the dried surface with a clean, dry cloth once fully hazy.
Curing:
- Ready for the light foot traffic after 24 hours.
Storage & Safety
- Shelf Life: 12 months from manufacture date in original, unopened, and undamaged sealed pails.
- Storage Conditions: Store elevated off the ground in a dry, covered, and moisture-free environment.
- Safety Precautions: Contains Portland cement which reacts alkaline with water and may cause skin or eye irritation. Wear protective rubber gloves, dust masks, and safety goggles during mixing and application. In case of eye contact, rinse immediately with generous amounts of clean running water and seek medical attention if irritation persists. Keep out of reach of children.
Inquiry - MAPEI KERACOLOR SF