Share:


Sikadur®-20 Crack Seal



Sikadur®-20 Crack Seal

Low-Viscosity Semi-Elastic Epoxy Crack Sealer

Sikadur®-20 Crack Seal is a two-component, solvent-free epoxy resin formulated for sealing non-structural cracks and cavities in concrete surfaces. Its low-viscosity formulation allows the material to penetrate into cracks and cavities, creating a strong adhesive bond while maintaining semi-elastic properties after curing.

Suitable for both dry and damp substrate conditions, this epoxy crack sealer provides a reliable solution for treating concrete cracks and leaking tile joints, especially before applying waterproofing systems. Its non-shrink formulation helps maintain effective crack sealing performance.

Suitable Applications

  • Sealing non-structural cracks in concrete floors and walls

  • Filling cracks in concrete roof structures

  • Repairing cracks in concrete balconies and decks

  • Sealing cracks in wet rooms and bathrooms

  • Treating cracks in swimming pool structures

  • Filling concrete cavities before waterproofing application

  • Repairing leaking floor tile joints in wet areas

  • Crack treatment before applying waterproofing membranes

Key Features

  • Low Viscosity: Flows into narrow cracks and cavities for effective sealing.

  • Semi-Elastic Properties: Provides flexibility compared to conventional rigid epoxy crack fillers.

  • High Adhesion Strength: Develops strong bonding to properly prepared concrete substrates.

  • Non-Shrink Formulation: Helps maintain the integrity of the repaired cracks.

  • Two-Component System: Epoxy resin and hardener are mixed before application.

  • Damp Surface Compatibility: Suitable for dry and damp substrates, provided there is no standing water.

  • Solvent-Free: Formulated without solvents.

  • Waterproofing Preparation: Suitable for treating non-structural cracks before subsequent waterproofing works.

Technical Specifications

  • Product Type: Two-component epoxy crack-sealing resin

  • Colour: Yellowish

  • Packaging: 160ml and 850ml sets

  • Density: Approximately 1.07kg/L

  • Viscosity: 83 ± 30 cps

  • Mixing Ratio: Component A : Component B = 1 : 1 by volume

  • Pot Life: Approximately 20 minutes at +30°C

  • Tensile Adhesion Strength: Approximately 2.0 N/mm² at 28 days (concrete failure on mechanically prepared concrete)

  • Shelf Life: 2 years when unopened and stored properly

Seal concrete cracks and prepare surfaces for waterproofing with Sikadur®-20 Crack Seal. Contact One Stop Paint Centre for product enquiries and assistance.



 Inquiry - Sikadur®-20 Crack Seal