Share:


Sikalastic®-110



Sikalastic®-110

High-Elasticity Polyurethane-Bituminous Waterproofing Coating

Sikalastic®-110 is a one-component, water-based polyurethane-bituminous waterproofing coating formulated to create a highly elastic, seamless and crack-bridging membrane. Its flexible formulation provides durable waterproofing protection for concrete structures, particularly in areas exposed to thermal movement and vibration.

With excellent adhesion to concrete and the ability to be applied directly onto suitably prepared damp surfaces, Sikalastic®-110 is suitable for concealed roof waterproofing, below-ground external walls and wet areas beneath tiles. It can be applied using a brush, roller or spray, including on vertical walls and ceilings.

Suitable Applications

  • Concealed reinforced concrete (RC) flat roofs

  • External basement walls and below-ground structures

  • Balconies and terraces beneath tiles

  • Podium decks beneath protective screed or tiles

  • Concrete surfaces exposed to thermal movement

  • Structures subject to vibration

  • Vertical concrete walls and ceiling surfaces

  • Concrete and cementitious substrates requiring flexible waterproofing

Key Features

  • High Elasticity: Provides excellent flexibility to accommodate substrate movement.

  • Crack Bridging: Helps bridge cracks and minimise water penetration through the waterproofing layer.

  • Polyurethane-Bituminous Technology: Combines polyurethane flexibility with bituminous waterproofing properties.

  • Excellent Concrete Adhesion: Provides strong bonding to properly prepared concrete substrates.

  • Damp Surface Application: Can be applied directly onto suitably prepared damp surfaces.

  • Seamless Membrane: Forms a continuous waterproofing layer without sheet membrane joints.

  • Easy Application: Suitable for brush, roller and spray application, including vertical surfaces and ceilings.

  • Environmentally Friendly: Water-based, non-toxic and low-VOC formulation.

  • High Elongation: Approximately 1,000% elongation at break without reinforcement.

Technical Specifications

  • Product Type: One-component polyurethane-bituminous waterproofing coating

  • Composition: Polyurethane-bituminous hybrid

  • Colour: Black

  • Packaging: 20kg pail

  • Density: Approximately 1.08kg/L

  • Tensile Strength: Approximately 1.5 N/mm²

  • Elongation at Break: Approximately 1,000% (without reinforcement)

  • Shelf Life: 12 months from production date

  • Application Temperature: +5°C to +40°C

  • Substrate Moisture Content: Less than 6%

  • Full Curing Time: Minimum 48 hours at +25°C

Recommended Consumption

Standard Coating System:

  • Primer: Approximately 0.20kg/m² (diluted with 1 part clean water)

  • First Coat: Approximately 0.65kg/m²

  • Second Coat: Approximately 0.65kg/m²

  • Total: Approximately 1.50kg/m²

Reinforced Coating System:

  • Primer: Approximately 0.20kg/m² (diluted with 1 part clean water)

  • First Coat: Approximately 0.80kg/m²

  • Reinforcement: 1 layer of Sika® Reemat Premium-120

  • Second Coat: Approximately 0.50kg/m²

  • Third Coat: Approximately 0.50kg/m²

  • Total Coating Consumption: Approximately 2.00kg/m², excluding reinforcement

Protect concealed roofs, balconies and concrete structures with the high-elasticity waterproofing performance of Sikalastic®-110. Contact One Stop Paint Centre for product enquiries and assistance.



 Inquiry - Sikalastic®-110