Sikalastic®-215 DRYLOK®
Concrete & Masonry Waterproofing Coating
Sikalastic®-215 DRYLOK® is a ready-to-use waterproofing coating developed with specialised polymer technology to protect concrete and masonry surfaces against water penetration. Its penetrating formulation seals capillary pores and creates a durable, smooth waterproofing finish.
Designed for both positive and negative-side waterproofing, Sikalastic®-215 DRYLOK® can withstand hydrostatic pressure of up to 15 PSI, equivalent to approximately 10 metres of water pressure. Its bright white finish also helps improve surface appearance, while its built-in biocide provides resistance to mildew growth on the dry film.
Suitable Applications
-
Interior and exterior concrete walls
-
Basement walls and floors
-
Lift pits and underground structures
-
Concrete block walls
-
Brickwork and masonry surfaces
-
Stucco and cement-rendered walls
-
Above-ground and below-ground masonry structures
-
Positive-side waterproofing
-
Negative-side waterproofing
-
Concrete surfaces requiring protection against water pressure
Key Features
-
Pressure-Resistant Waterproofing: Withstands water pressure of up to 15 PSI, equivalent to approximately 10 metres of water head.
-
Positive & Negative Waterproofing: Suitable for waterproofing applications from either side of masonry structures.
-
Penetrating Polymer Technology: Penetrates porous substrates and seals capillary pores.
-
Ready to Use: No additional mixing required.
-
Mildew Resistance: Contains biocide to resist mildew growth on the dry film.
-
Efflorescence Control: Helps mitigate white mineral deposits on masonry surfaces.
-
Smooth White Finish: Provides a bright, clean and uniform surface appearance.
-
Paintable Surface: Can be recoated with suitable latex paint after proper drying.
-
Low VOC: Contains less than 25g/L VOC.
Technical Specifications
-
Product Type: Polymer-based concrete and masonry waterproofer
-
Colour: White
-
Packaging: 5kg pail / 20kg pail
-
Density: Approximately 1.38g/ml
-
pH Value: 9.0 ± 0.5
-
Solid Content: 69% ± 2%
-
VOC Content: Less than 25g/L
-
Tensile Adhesion Strength: Greater than 1.0 N/mm²
-
Water Pressure Resistance: 15 PSI according to ASTM D7088
-
Application Temperature: +10°C to +40°C
-
Maximum Relative Humidity: 85%
-
Shelf Life: 2 years from production date
Recommended Consumption
Standard Application on Dry Substrates:
-
Primer: 0.30kg/m²
-
First Coat: 0.60kg/m²
-
Second Coat: 0.60kg/m²
-
Total Consumption: Approximately 1.50kg/m²
Application on Wet Substrates:
-
Primer: Sikalastic®-201 DRYLOK® Wet Primer at 0.15kg/m²
-
First Coat: 0.60kg/m²
-
Second Coat: 0.60kg/m²
-
Total Consumption: Approximately 1.35kg/m², excluding primer
Protect concrete and masonry structures against water penetration with Sikalastic®-215 DRYLOK®. Contact One Stop Paint Centre for product enquiries and assistance.
Inquiry - Sikalastic®-215 DRYLOK®