Obaproof WP-100HD
Water-Based PU Bituminous Waterproofing Membrane
Obaproof WP-100HD is a water-based, polyurethane-modified bituminous liquid waterproofing membrane. It cures into a seamless, highly elastic, and durable protective layer to prevent water ingress.Packing: 5kg / 20kg
Appearance: Dark Coffee (Wet) / Black (Cured)
Product Overview
An advanced, single-component polyurethane bituminious liquid coating formulated for superior flexibility and waterproofing integrity. It cures via atmospheric moisture to create a membrane that tolerates damp substrates and accomodates structural movement without cracking.
Key Advantages
- Ultra-High Flexibility: Outstanding elongation at break (>1200%) and bridges micro-cracks up to 2mm.
- Versatile Bonding: Applies effectively onto damp substrates (free of standing water) with exceptional adhesion.
- Seamless Barrier: Liquid-applied method eliminates cold joints, overlaps, risk of membrane leakage.
- Eco-Friendly & Safe: Water-based, low VOC formulation that cures with environmental mositure.
Recommended Applications
- RC flat roofs, car porch roofs, and balconies
- Bathrooms, kitchens, and wet internal areas
- Planter boxes, driveways, and lift pits
- Retaining walls, basements, and RC gutters
Coverage Rates
- Walls: 0.5kg/m2 per coat
- Floors / Bathrooms: 0.75kg to 1.0kg/m2 per coat
- Roofs, Balconies & Planter Boxes (with Reinforcement Mesh): 0.85kg to 1.5kg/m2 per coat
Application & Working Guidelines
- Surface Preparation: Clean substate throughly by clearing debris, dust, and loose cement ash. Conduct a 24-hour structural ponding test before application and seal active leaks with PU grouting injection.
- Priming: Dilute 1 part Obaproof CM-700WP with 3 parts clean water and apply a thin priming coat at 0.2kg/m2. Allow to dry for approximate 30 minutes.
- Mixing & Tooling: Stir slowly with an electric mixer prior to use (up to 10% clean water can be added for workability). Apply using a brush, roller, broom, or airless spray.
- Recoating Interval: Apply the first coat (0.75kg/m2) and let dry for 6 - 8 hours. Embed fiberglass mesh if specified, the apply the second coat (approximate 1.0kg/m2) ensuring the reinforcement is fully encapsulated.
- Curing & Protection: Protect from rain exposure for at least 2 hours after application. Allow 8 hours for cure before performing a 24 hours water ponding test. Not intended for permanent direct UV exposure; apply a protective screed or topping layer over the cured membrane.
- Clean-up: Tools and equipment can be cleaned with clean water immediately after use. Cured product requires mechanical removal.
Storage & Safety
- Shelf Life: Store sealed in original containers in a cool, shaded, and dry environment.
- Safety Precautions: Wear protective gloves, protective dust masks, and safety eyewear during handling. In case of eye contact, rinse immediately with clean running water and consult a physician.
Inquiry - Obaproof WP-100HD