Share:


Obaproof Bituflex-1001



Obaproof Bituflex-1001

Water-Based Bituminious Protective Coating

Obaproof Bituflex-1001 is a single-component, low-viscosity water-based bituminous liquid membrane. Formulated by reacting asphalt with an advanced blend of MMA, natural rubber, and polyurethane polymers, it cures into a tough, flexible, and seamless protective film against water penetration and corrosion.

Packing: 5kg / 18kg / 200kg
Form: Liquid
Appearance: Black

Product Overview
An advanced, single-pack polymer-modified bituminous emulsion engineered for reliable waterproofing and below-ground structural protection. Its low viscosity allows deep substrate penetration and superior adhesion across dry or damp surfaces. Once fully cured, it creates an elastic, non-toxic membrane that resists bubbling, side osmosis, and degradation even under continuous water submersion.

Key Advantages
  • Multi-Polymer Elasticity: Combines natural rubber, polyurethane, and MMA polymers for high flexibility and strong tear resistance (11 kgf/cm²).
  • Submerged & Osmosis Resistant: Applies smoothly directly onto damp or moist mineral substrates without compromising bond strength.
  • Chemical & Corrosion Defense: Shields metal surfaces, pipes, and underground concrete against soil acids, alkalis, and harsh chemicals.
  • Fast-Drying & User-Friendly: Single-component, water-based, non-toxic, easy to apply, and capable of seamless re-application.

Recommended Applications
  • Bathrooms, kitchens, suspended floors, and wet internal areas
  • Terraces, balconies, and damp-proof courses (DPC)
  • Planter boxes, RC gutters, and external retaining walls
  • Basements, foundations, and underground concrete protection
  • Linings for water tanks, swimming pools, fountains, pipes, and metal corrosion protection

Coverage Rates
  • Roofs, Bathrooms & Kitchens: ~0.5kg/m2 per coat (approx. 1.0kg/m2 across 2 cooats)
  • Planter Boxes, Balconies, Swimming Pools & Basements: ~0.8kg/m² per coat (approx. 1.6kg/m² across 2 coats)
Obaproof Bituflex-1001 must be applied in a minimum of 2 coats. Never exceed 2.0kg/m2 in a single layer to ensure uniform curing.


Application & Working Guidelines
  • Surface Preparation: Substrates must be structurally sound, clean, and thoroughly cleared of grease, oil, laitance, dirt, and loose contaminants. Pre-dampen absorbent substrates until moist, ensuring zero standing puddle water remains.
  • Detail Reinforcement: Pre-treat critical areas—such as cracks, secondary construction joints, right-angle wall-to-floor corners, and pipe boundaries—with an initial reinforcing layer of Obaproof Bituflex-1001.
  • Priming: For porous substrates or areas with high water infiltration, prime using a compatible permeable primer (diluted 1:3 with water) or dilute 1 part Bituflex-1001 with 3 parts clean water to improve surface bonding. Allow ~30 minutes wait time indoors before topcoating (dry outdoor surfaces may be coated directly once primed).
  • Mixing & Tooling: Pre-mixed and ready to use. For smoother workability if needed, add no more than 1kg of clean water per 20kg of product. Apply evenly using a brush, roller, or airless spray machine.
  • Recoating Interval: Apply the first coat evenly (tack-free in 30 to 60 minutes). Allow approximately 8 hours of drying time before applying the second coat crosswise (perpendicular to the first layer).
  • Curing: Allow at least 8 hours of curing before laying finishing screeds or tiles, and 24 hours for full dry performance. Protect the coating from physical damage or rain during initial setting.
  • Clean-up: Clean all brushes, rollers, and application tools with clean water immediately after use. Cured material must be removed mechanically.

Storage & Safety
  • Shelf Life: 12 months from manufacture date in original, unopened, and undamaged sealed packaging.
  • Storage Condition: Store in a cool, dry, and well-ventilated place protected from direct sunlight and frost.
  • Safety Precautions: Ensure adequate ventilation during application. Wear impervious gloves, barrier cream, and protective eye goggles. In case of eye contact, rinse immediately with generous clean water and seek medical attention if symptoms persist. Wash off skin contact immediately with soap and water before curing (do not use solvents). Keep out of reach of children.


 Inquiry - Obaproof Bituflex-1001