Share:


Obaproof WP-100HD



Obaproof WP-100HD

Water-Based PU Bituminous Waterproofing Membrane

Obaproof WP-100HD is a water-based, polyurethane-modified bituminous liquid waterproofing membrane. It cures into a seamless, highly elastic, and durable protective layer to prevent water ingress.

Packing: 5kg / 20kg
Appearance: Dark Coffee (Wet) / Black (Cured)

Product Overview
An advanced, single-component polyurethane bituminious liquid coating formulated for superior flexibility and waterproofing integrity. It cures via atmospheric moisture to create a membrane that tolerates damp substrates and accomodates structural movement without cracking.

Key Advantages
  • Ultra-High Flexibility: Outstanding elongation at break (>1200%) and bridges micro-cracks up to 2mm.
  • Versatile Bonding: Applies effectively onto damp substrates (free of standing water) with exceptional adhesion.
  • Seamless Barrier: Liquid-applied method eliminates cold joints, overlaps, risk of membrane leakage.
  • Eco-Friendly & Safe: Water-based, low VOC formulation that cures with environmental mositure.

Recommended Applications
  • RC flat roofs, car porch roofs, and balconies 
  • Bathrooms, kitchens, and wet internal areas
  • Planter boxes, driveways, and lift pits
  • Retaining walls, basements, and RC gutters

Coverage Rates
  • Walls: 0.5kg/m2 per coat
  • Floors / Bathrooms: 0.75kg to 1.0kg/m2 per coat
  • Roofs, Balconies & Planter Boxes (with Reinforcement Mesh): 0.85kg to 1.5kg/m2 per coat
Obaproof WP-100HD must be applied in a minimum of 2 coats. Never apply more than 2.0kg/m2 in a single coat to prevent peeling or surface cracking.

Application & Working Guidelines
  • Surface Preparation: Clean substate throughly by clearing debris, dust, and loose cement ash. Conduct a 24-hour structural ponding test before application and seal active leaks with PU grouting injection. 
  • Priming: Dilute 1 part Obaproof CM-700WP with 3 parts clean water and apply a thin priming coat at 0.2kg/m2. Allow to dry for approximate 30 minutes.
  • Mixing & Tooling: Stir slowly with an electric mixer prior to use (up to 10% clean water can be added for workability). Apply using a brush, roller, broom, or airless spray.
  • Recoating Interval: Apply the first coat (0.75kg/m2) and let dry for 6 - 8 hours. Embed fiberglass mesh if specified, the apply the second coat (approximate 1.0kg/m2) ensuring the reinforcement is fully encapsulated.
  • Curing & Protection: Protect from rain exposure for at least 2 hours after application. Allow 8 hours for cure before performing a 24 hours water ponding test. Not intended for permanent direct UV exposure; apply a protective screed or topping layer over the cured membrane.
  • Clean-up: Tools and equipment can be cleaned with clean water immediately after use. Cured product requires mechanical removal.

Storage & Safety
  • Shelf Life: Store sealed in original containers in a cool, shaded, and dry environment.
  • Safety Precautions: Wear protective gloves, protective dust masks, and safety eyewear during handling. In case of eye contact, rinse immediately with clean running water and consult a physician.


 Inquiry - Obaproof WP-100HD