Obaproof WP-500 FIBER
Water-Based Liquid Elastic Waterproofing Coating with Internally Reinforced Micro-Fibers
Obaproof WP-500 FIBER is a one-component, styrene-acrylic copolymer liquid waterproofing membrane reinforced with internal micro-fibers. It cures to foam a tough, flexible, and durable protective membrane layer suitable for harsh and tropical climates.Packing: 1kg / 5kg / 20kg
Form: Emulsion
Appearance: White / Grey
Product Overview
A specialized water-based liquid elastic coating engineered with built-in micro-fiber reinforcement to significantly enhance tensile strength and resist tearing. It easily accommodates structural expansion and shrinkage movements without cracking, providing an impervious, weather-resistant barrier for exposed horizontal roofs and vertical wall surfaces.
Key Advantages
- Internally Reinforced Strength: Integrated micro-fibers substantially increase tensile strength (~2.2 N/mm2) while maintaining elastic elongation (~155%).
- Weather & UV Resistant: Highly resistant to prolonged UV rays, torrential rain, and water splashes without degrading.
- Seamless Crack Bridging: Penetrates into hairline cracks and absorbs expansion movements to eliminate water ingress.
- Eco-Friendly & Safe: Water-based, low VOC formulation, non-toxic, odorless, and non-flammable.
Recommended Applications
- Exposed horizontal and sloped roofs (concrete decks, asbestos roofs, clay/concrete roof tiles, and cement mortar)
- Metal and zinc roofs or eaves
- External vertical walls (brickwork with plaster, mortars, and parapets) against surface water penetration
- Waterproofing underlayment beneath tiles (e.g, balconies)
Coverage Rates
- Primer Coat: 0.2kg/m2 (Obaproof CM-700 diluted 1:3 with clean water)
- First Coat: 0.75kg/m2 of Obaproof WP-500 FIBER
- Second Coat: 0.75kg/m2 of Obaproof WP-500 FIBER
Application & Working Guidelines
- Surface Preparation: Substrates must be clean, dry, structurally sound, and cleared of dust, grease, oil, and loose material.
- Priming: Dilute 1 part Obaproof CM-700WP with 3 parts clean water and apply a thin priming coat at 0.2kg/m2. Allow to dry for approximate 30 minutes.
- Mixing: Stir manually or blend with a low-speed mechanical mixer until the emulsion is completely homogeneous prior to use.
- Application & Recoating: Apply evenly using a brush or roller. The film becomes tack-free within 1 to 2 hours (at +30°C). Allow the first coat to dry thoroughly before applying the second coat crosswise.
- Curing: Full cure is reached in approximately 60 hours (at +30°C). Apply as an exposed finishing coat or protected layer with adequate drainage.
- Clean-up: Clean all brushes, rollers, and application tools with clean water immediately after use. Cured material must be removed mechanically.
Important Limitations
- Not for Immersion: DO NOT use in areas subject to permanent water contact, ponding, or water immersion (such as swimming pools, water tanks, shower enclosures, toilets, or wet kitchens).
- Surface Care: Avoid dragging or placing sharp , piercing objects directly on top of the cured membrane.
Storage & Safety
- Shelf Life: Up to 12 months from manufacture date in original, unopened, and undamaged sealed packaging stored between +5°C and +30°C.
- Safety Precautions: Wear protective gloves, protective dust masks, and safety eyewear during handling. Keep out of reach of children.
Inquiry - Obaproof WP-500 FIBER