Share:


MAPEI Mapeband Easy



MAPEI Mapeband Easy

Alkali-Resistant Rubber Joint Tape Coated with Non-Woven Fabric

MAPEI Mapeband Easy is a high-elasticity rubber sealing tape coated on both sides with alkali-resistant non-woven polypropylene fabric. Engineered specifically for reinforcing flexible joints and corners within liquid-applied and cementitious waterproofing systems, it provides a durable, watertight bridge against structural movement.

Packing: 10m / 30m roll (Width:130mm)
Form: Rubber Tape
Color: Grey / White

Product Overview
An ultra-flexible, deformable joint reinforcement tape designed to eliminate weak points in waterproofing assemblies where cracks most commonly occur. Featuring a central rubber core flanked by perforated fleece edges, it seamlessly locks into liquid waterproofing membranes, preventing tearing caused by building settlement, thermal expansion, or substrate vibration.

Key Advantages
  • Ultra-High Elasticity: Elongation at break exceeding 300%, easily accommodating dynamic joint movement and structural shifts without snapping.
  • Superior Mechanical Bonding: Perforated edges and double-sided non-woven fabric allow waterproofing compounds to deeply saturate and anchor the tape.
  • Alkali & Chemical Resistant: Engineered to withstand alkaline cementitious mortars, moisture, and harsh chemical environments without degrading.
  • Flexible & Adaptable: Easily conforms to internal/external corners, wall-to-floor intersections, and complex structural transitions.
  • User-Friendly Installation: Lightweight, easy to cut with scissors or a utility knife, and embeds effortlessly into wet waterproofing layers.

Recommended Applications
  • Wall-to-floor joints
  • External or internal wall corners in bathrooms and wet kitchens
  • Control joints, expansion joints, and perimeter transitions on balconies, terraces, and flat roof
  • Joint sealing in swimming pools, water tanks, and fountains prior to membrane coating

Application & Working Guidelines
  • Surface Preparation: Substrate along corners and joints must be structurally sound, clean, dry, and free of dust, grease, oil, loose mortar, and sharp protrusions.
  • First Waterproofing Layer: Apply an even, generous base coat of your selected waterproofing membrane (such as MAPEI Aquaflex) along both sides of the corner or joint using a brush or flat trowel.
  • Tape Embedment: Cut Mapeband Easy to the required length. Immediately press the tape firmly into the wet waterproofing layer using a smooth trowel or roller, ensuring zero air pockets, wrinkles, or folds remain. Allow overlapping joints of at least 50mm (bonded with the waterproofing product).
  • Overcoating: Apply a second continuous coat of the waterproofing membrane directly over the entire surface of Mapeband Easy, ensuring the non-woven fabric edges and perforations are completely saturated and encapsulated.
  • Curing: Allow the complete waterproofing system to cure according to the specific waterproofing membrane's guidelines before tiling or screeding.
  • Clean-up: Clean tools and hands with clean water immediately after applying the waterproofing compound before it sets.

Storage & Safety
  • Shelf Life: 24 months from manufacture date in original, unopened, and undamaged sealed pails.
  • Storage Conditions: Store flat or upright in a dry, covered area away from direct sunlight, heat sources, and sharp objects that could puncture the rubber core.
  • Safety Precautions: Non-hazardous inert material. Standard safety gloves and safety eyewear is recommended when handling alongside wet cementitious or liquid waterproofing products. Keep out of reach of children.


 Inquiry - MAPEI Mapeband Easy