Obaproof WP-200HD
Solvent-Free Single Component Elastrometric Liquid Coating
Obaproof WP-200HD is a solvent-free, single-component elastrometric liquid-applied waterproofing membrane. It cures into flexible, seamless protective barrier designed to prevent water infiltration across both exposed and concealed structural areas.Packing: 1kg / 4.5kg / 20kg
Form: Emulsion
Color: White / Grey
Product Overview
A high-performace, water-based elastomeric liquid coating engineered for exceptional elasticity, adhesion, and crack-bridging capability. It cures upon atmospheric moisture contact to create a joint-free, monolothic waterproof layer suitable for flat horizontal roofs, wet rooms, and vertical external facades.
Key Advantages
- High Elasticity & Crack Resistance: Impressive elongation at break (>482%) that acccommodates structural movement and bridges micro-cracks up to 1.2mm.
- Eco-Friendly & Safe: Water-based, solvent-free, low VOC, and non-hazardous during handling.
- Damp Surface Compatible: Bonds strongly onto damp or moist mineral substrates without delaminating.
- Weather & UV Tolerant: Suitable for exterior plastered walls and sloped exposed roofing assemblies with proper fall.
Recommended Applications
- RC flat roofs, car porch roofs, metal/zinc roofs, and gutter
- Bathrooms, yards, balconies, and aircon ledges
- External plastered brick walls, parapets, mortars, and tile repairs
- Waterproofing underlayment beneath tile finishes or screeds
Coverage Rates
- Vertical Walls: 0.5kg/m2 per coat (approximate 0.8mm dry film thickness across 2 coats; minimum 1.0kg/m2 total)
- Horizontal Floors / Bathrooms: 0.75kg/m2 per coat (approximate 1.2mm dry film thickness across 2 coats; minimum 1.5kg/m2 total)
- Reinforced Roofs & Terraces (with Fiber Mesh): 0.85kg/m2 per coat (approximate 1.5mm dry film thickness across 2 coats; minimum 1.7kg/m2 total)
Application & Working Guidelines
- Surface Preparation: Substrates must be structurally sound, dry to the touch, and free of dirt, grease, oil, and loose contaminants. Perform a structural check and repair active leaks with PU injection grouting prior to application.
- Priming: Dilute 1 part Obaproof CM-700WP with 3 parts clean water and apply a thin priming coat at 0.2kg/m2. Allow to dry for approximate 30 minutes.
- Mixing & Tooling: Stir slowly with an electric mixer prior to use (up to 10% clean water can be added for workability). Apply using a brush, roller, broom, or airless spray.
- Recoating Interval: Apply the first coat (0.75kg/m2) and let dry for 6 - 8 hours (minimum 4 hours to prevent blistering. Embed fiberglass reinforcement mesh over high-stress joints if required, then apply the second coat (approximate 1.0kg/m2) ensuring total coverage.
- Curing & Exposure: Allow 8 hours for full cure. For exposed applications, ensure roofs are laid to fall to prevent standing water. If ponding tests are necessary, limit test exposure to a maximum of 24 hours.
- Clean-up: Tools and equipment can be cleaned with clean water immediately after use.
Storage & Safety
- Shelf Life: Store sealed in original containers in a cool, shaded, and dry environment.
- Safety Precautions: Wear protective gloves, protective dust masks, and safety eyewear during handling. In case of eye contact, rinse immediately with clean running water and consult a physician.
Inquiry - Obaproof WP-200HD