Obaproof CM-700WP Ready Mix
Cement Modifier & Waterproofing Primer
Obaproof CM-700WP is a ready-to-use styrene-acrylic copolymer liquid emulsion modified with MMA and butadiene. Engineered as an easy-to-apply bonding agent, primer, and mortar enhancer, it deeply penetrates concrete capillaries to seal micro-pores, consolidate light surface dust, and maximize adhesion for subsequent waterproofing membranes.Packing: 4L / 18L
Form: Liquid
Color: Milky White
Product Overview
A user-convenient, eco-friendly liquid polymer modifier designed to upgrade concrete screeds and prime mineral surfaces without requiring on-site ratio guesswork. When applied directly onto porous concrete, it cures chalky dust and forms a tough interlocking film that shields against moisture osmosis and reinforcement corrosion. When blended into mortars, it densifies the paste structure to provide enhanced impact resistance, flexibility, and waterproofing.
Key Advantages
- Convenient Ready-Mix Formula: Pre-calibrated liquid consistency ensures hassle-free application and consistent site performance
- Ultimate Bonding & Consolidation: Locks down powdery surface dust and dramatically enhances adhesion between concrete substrates and waterproofing coatings.
- Pore-Sealing & Corrosion Defense: Blocks moisture permeation and osmosis, effectively preventing cement aging and rebar rusting.
- Mositure Tolerant: Applies safely onto dry, damp, or wet sound concete without foaming, blistering, or delaminating.
- High Mechanical Durability: Improves tensile strength, crack resistance, impact tolerance, and anti-slip properties of cement renders.
- Eco-Friendly & Safe: Water-based, low VOC, non-toxic, non-flammable, non-corrosive, and anti-freezing.
Recommended Applications
- Direct primer for liquid waterproofing membranes (acrylic, PU, and bituminous systems)
- Bonding slurry/ agent between existing and fresh concrete
- High-strength, crack-resistant patch repairs and screeding
- Bonding agent for angle fillets and manhole lining works
- Multi-purpose structural additive for mansory and render mortars
Coverage and Mixing Proportions
- As a Waterproofing Primer / Substrate Consolidator
- As a Cement / Mortar Modifier (Patching, Repair & Rendering)
- Cement: 50kg
- Clean Sand: 150kg
- Obaproof CM-700WP: 5kg
- Water: 15kg
Application & Working Guidelines
- Surface Preparation: All substrates must be sound, clean, and completely free from dirt, mold, grease, oil, and loose contaminants that could impair adhesion.
- Priming Work: Apply an even, continuous coat using a nap roller, brush, or spray machine. Allow approximately 30 minutes to cure into a tacky or tack-free film before applying waterproof coatings or screeds.
- Mortar Mixing: Blend dry sand and cement, then add the gauged liquid mixture of CM-700WP and water into a mechanical mixer and blend until a uniform, lump-free workable consistency is achieved.
- Application Temperature: Minimum ambient and substrate temperature of 5°C.
- Clean-up: Tools and equipment can be cleaned with clean water immediately after use. Cured product requires mechanical removal.
Storage & Safety
- Shelf Life: 12 months from manufacture date, unopened packaging stored in a cool and dry area.
- Safety Precautions: Wear protective rubber gloves and safety goggles during handling. In case of eye contact, rinse immediately with clean running water and consult a physician. For skin contact, clean immediately before the material dries using soap and water. Keep away from children.
Inquiry - Obaproof CM-700WP Ready Mix