PENTENS T-200H
UV Resistant Elastromeric Waterproofing Coating (Heat-Reducing Formulation)
PENTENS T-200H is a single-component elastomeric liquid membrane formulated with advanced water-based polyurethane and acrylic polymers. It seamless waterproofing protection while significantly reducing solar heat gain on building.Packing: 20kg / 200kg (also available in smaller consumer sizes)
Form: Liquid (cross-linking PU-acrylic copolymer emulsion)
Color: Grey, White, Green, Yellow, etc.
Product Overview
A specialized, single-pack PU-acrylic elastomeric barrier engineered to reflect solar radiation and lower surface temperatures on exposed roofs and facades. Combining superior elongation with breathable vapor transmission, it prevents blistering from trapped moisture while keeping building interiors cooler and protecting concrete and metal substrates from thermal stress.
Key Advantages
- Solar Heat Reduction: Dramatically lowers solar heat absorption on exposed roofs and walls, reducing surface temperatures.
- High Elongation & Flexibility: Formulated with tough PU-acrylic binders that accommodate structural expansion and bridge hairline cracks without tearing.
- Certified Weather & UV Defense: Shielded against intense solar radiation, weather aging, and environmental pollutants.
- Eco-Friendly & Safe: Water-based, low VOC, odorless, non-toxic, and user-friendly to apply across various substrates.
Recommended Applications
- Exposed concrete flat roofs, roof decks, and floor slabs
- RC gutters and planter boxes
- Metal profile and zinc roofing
- External builing facades, parapets, and concrete structures
- Wood sliding, timber decking, and wood fencing
Coverage Rates
- Horizontal Roofs, Decks & Slabs: ~0.75kg to 1.0kg/m² per coat (approx. 1.5kg to 2.0kg/m² across 2 neat coats)
- Vertical Walls & Facades: ~0.5kg/m² per coat (approx. 1.0kg/m² across 2 coats)
Application & Working Guidelines
- Surface Preparation: Substrates must be solid, clean, dry, and cleared of dust, moss, oil, grease, and loose coatings. Repair structural cracks and honeycombing prior to coating.
- Priming: Dilute 1 part PENTENS T-007 with 3 parts clean water and apply a thin priming coat at 0.2kg/m2. Allow to dry for approximate 30 minutes.
- Mixing & Tooling: Stir thoroughly before use. Apply evenly using a brush, long-nap roller, or airless spray equipment.
- Recoating Interval: Apply the first coat undiluted and allow 4 to 8 hours drying time before applying the second coat crosswise (perpendicular to the first layer).
- Working Conditions: Apply within an ambient and substrate temperature range of 8°C to 40°C. Do not apply if rain or high moisture condensation is expected within 24 hours.
- Clean-up: Tools and equipment can be cleaned with clean water immediately after use.
Storage & Safety
- Shelf Life: 12 months from manufacture date in original, unopened, and undamaged sealed pails.
- Storage Conditions: Store in a ventilated, shaded, and dry environment.
- Safety Precautions: Non-toxic water-based formulation. Standard PPE (gloves, eye protection, and protective masks) should be worn during application. In case of skin or eye contact, rinse thoroughly with clean water. Keep out of reach of children.
Inquiry - PENTENS T-200H