Share:


PENTENS T-305TH



PENTENS T-305TH

Cementitious Waterproofing Coating (Two-Component)

PENTENS T-305TH is a polymer-modified, two-component cementitious waterproofing coating. It bonds firmly to concrete and masonry to form an impermeable, protective barrier against water infiltration and aggressive chemicals.

Packing: 35kg /set
Part A: Liquid (10kg /pail)
Part B: Powder (25kg /bag)

Apperance:
Part A: Milky Liquid
Part B: Grey Powder

Product Overview
A high-grade, two-part acrylic polymer cementitious slurry engineered for both positive and negative side waterproofing. Composed of premium Portland cement, selected silica quartz, and flexible acrylic polymers, it seals micro-capillaries, protects reinforced concrete from carbonation and chemical degradation, and provides a durable, moisture-tight finish.

Key Advantages
  • Pre-Batched & High Workability: Factory-calibrated ratios mix smoothly and apply cleanly by brush, roller, or trowel.
  • Durable Protection: Superior resistance against carbon dioxide penetration, de-icing salts, and aggressive frost damage.
  • Impermeable & Tough: High water tightness with mild elasticity to absorb minor substrate thermal movement.
  • Strong Bonding: Excellent adhesion to sound concrete, plaster renders, brickwork, and mineral substrates.
  • Eco-Friendly & Safe:  Non-toxic formulation, completely safe for potable water storage structures.

Recommended Applications
  • Portable water tanks and reservoirs
  • Bathrooms, kitchens, and wet internal areas (floors and walls)
  • Balconies, terraces, and RC gutter
  • Basements, lift pits, and retaining walls
  • Seawalls and coastal concrete structures

Coverage Rates
  • Bathrooms, Balconies & Terraces: ~1.0kg/m² per coat (approx. 2.0kg/m² across 2 coats)
  • Waterproofing up to 1m Water Head: ~1.5kg/m² per coat (approx. 3.0kg/m² across 2 coats)
  • Waterproofing over 1m Water Head / Heavy Pressure: ~2.0kg/m² per coat (approx. 4.0kg/m² across 2 coats)
PENTENS T-305TH must be applied in a minimum of 2 coats. Never apply excessively thick layers in a single coat (keep below 2.0kg/m² per pass).

Application & Working Guidelines
  • Surface Preparation:  Substrates must be solid, clean, dry, and cleared of dust, moss, oil, grease, and loose coatings. Pre-wet absorbent concrete thoroughly to achieve a saturated-surface-dry (SSD) condition with zero standing water.
  • Mixing & Tooling: Pour Part A (Liquid) into a clean mixing pail, then gradually add Part B (Powder) while stirring with a mechanical stirrer for 3 to 5 minutes until a uniform, lump-free slurry is formed.
  • Pot Life: Approximately 30 to 45 minutes at 30°C (shorter in hot, dry climates). Use mixture promptly.
  • Recoating Interval: Apply the first coat undiluted and allow 4 to 8 hours drying time before applying the second coat crosswise (perpendicular to the first layer).
  • Curing: Allow at least 24 hours of curing before tiling, screeding, or conducting water ponding tests. Protect fresh coatings from direct scorching sun or heavy rain during the initial curing phase.
  • Working Conditions: Apply within an ambient and substrate temperature range of 8°C to 40°C. Do not apply if rain or high moisture condensation is expected within 24 hours.
  • Clean-up: Tools and equipment can be cleaned with clean water immediately after use. 

Storage & Safety
  • Shelf Life: 12 months from manufacture date in original, unopened, and undamaged sealed pails.
  • Storage Conditions: Store in a ventilated, shaded, and dry environment.
  • Safety Precautions: Standard PPE (gloves, eye protection, and protective masks) should be worn during application. In case of skin or eye contact, rinse thoroughly with clean water. Keep out of reach of children.


 Inquiry - PENTENS T-305TH