Share:


PENTENS T-101



PENTENS T-101

Water-Based Bituminous Protective Coating

PENTENS T-101 is a single-component, low-viscosity water-based bituminous liquid membrane. Formulated with an advanced blend of MMA, natural rubber, polyurethane, and asphalt emulsion, it cures into a tough, highly elastic, and impermeable protective barrier against water ingress and corrosion.

Packing: 5kg / 20kg / 200kg
Form: Liquid
Color: Black

Product Overview
A specialized, single-pack polymer-modified bituminous emulsion engineered for efficient, seamless waterproofing and structural protection. Its low viscosity allows deep substrate penetration and superior adhesion to dry or damp surfaces. When fully cured, it forms an elastomeric, non-toxic membrane that resists bubbling, side osmosis, and degradation even under extended water immersion.

Key Advantages
  • Multi-Polymer Flexibility: Combines rubber, PU, and MMA polymers for high elasticity and long-lasting crack resistance.
  • Submerged & Osmosis Resistant: Resists blistering, debonding, and side osmosis; remains stable even under permanent water contact.
  • Damp Surface Compatible: Applies smoothly onto damp or moist mineral substrates without compromising adhesion.
  • Corrosion & Chemical Protection: Shields metal, concrete, and pipe linings against aggressive chemicals, soil acids, and alkalis.
  • User-Friendly: Single-component, water-based, low-odor, non-toxic, and easy to apply or re-coat.

Recommended Applications
  • Bathrooms, kitchens, suspended floors, and wet internal area
  • RC gutters and planter boxes
  • Terraces, balconies, and damp-proof courses
  • Basements, foundations, lift pits, and underground concrete structure

Coverage Rates
  • Roofs, Bathrooms & Kitchens: ~0.75kg/m² per coat (approx. 1.5kg/m² across 2 coats)
  • Planter Boxes, Balconies, Pools & Basements: ~0.80kg/m² per coat (approx. 1.6kg/m² across 2 coats)
A minimum of 2 coats is recommended. Never exceed 1.0kg/m² in a single layer to avoid surface cracking or uneven curing.

Application & Working Guidelines
  • Surface Preparation:  Substrates must be solid, clean, dry, and cleared of dust, moss, oil, grease, and loose coatings. Repair structural cracks and honeycombing prior to coating.
  • Priming: Dilute 1 part PENTENS T-007 with 3 parts clean water and apply a thin priming coat at 0.2kg/m2. Allow to dry for approximate 30 minutes.
  • Mixing & Tooling:  Stir thoroughly before use. If necessary for workability, add no more than 1kg of clean water per 20kg pail. Apply evenly using a brush, long-nap roller, or airless spray equipment.
  • Recoating Interval: Apply the first coat undiluted and allow approximately 8 hours drying time before applying the second coat crosswise (perpendicular to the first layer).
  • Curing: Allow at least 24 hours of curing before laying screeds, installing tiles, or subjecting the surface to water exposure.
  • Clean-up: Tools and equipment can be cleaned with clean water immediately after use. 

Storage & Safety
  • Shelf Life: 12 months from manufacture date in original, unopened, and undamaged sealed pails.
  • Storage Conditions: Store in a ventilated, shaded, and dry environment.
  • Safety Precautions: Standard PPE (gloves, eye protection, and protective masks) should be worn during application. In case of skin or eye contact, rinse thoroughly with clean water. Keep out of reach of children.


 Inquiry - PENTENS T-101