PENTENS T-100
Water-Based PU Bituminious Waterproofing Membrane
PENTENS T-100 is a specially formulated, single-component polyurethane bituminous liquid waterproofing membrane. It cures into a seamless, high-elasticity barrier that bonds tenaciously to both internal and external surfaces.Packing: 20kg / pail
Form: Liquid (cross-linking copolymer emulsion)
Color: Grey, White, Green, Yellow, etc.
Product Overview
An advanced, water-based PU-modified bituminous liquid coating engineered for superior waterproofing on complex structural geometries. Unlike sheet membranes that risk joint failures, PENTENS T-100 cures into a continuous, joint-free monolithic film that tolerates damp substrates, accommodates structural shifts, and resists heat sagging or creeping
Key Advantages
- High Elasticity: Outstanding flexibility that bridges hairline cracks and structural movement without rupturing.
- Thermal & Creep Resistance: Thermally stable formulation that will not run, bleed, or creep under high ambient heat.
- Superior Multi-Substrate Adhesion: Bonds firmly to concrete, masonry, brickwork, metal, and timber.
- Chemical Resistance: Protects against a wide range of mild acids, alkalis, and soil chemicals.
- Eco-Friendly & Safe: Water-based, low VOC, odorless, non-toxic, and user-friendly to apply across various substrates.
Recommended Applications
- Bathrooms, kitchens, and wet internal areas
- Floor slabs, patios, terraces, and balconies
- Planter boxes, RC gutters, and external retaining walls
- Basements, lift pits, foundations, and fountains
- Swimming pools and water retention structures (under screed/tiles)
Coverage Rates
- Floors & Wet Areas: ~0.75kg to 1.0kg/m² per coat (approx. 1.5kg to 2.0kg/m² across 2 neat coats)
- Vertical Walls / Retaining Walls: ~0.5kg/m² per coat (approx. 1.0kg/m² across 2 coats)
- Roofs & Planter Boxes (with Reinforcement Mesh): ~0.85kg to 1.5kg/m² per coat (approx. 1.7kg to 2.0kg/m² total)
Application & Working Guidelines
- Surface Preparation: Substrates must be clean, dry, and cleared of dust, moss, oil, grease, and loose coatings. Repair structural cracks and honeycombing prior to coating.
- Priming: Dilute 1 part PENTENS T-007 with 3 parts clean water and apply a thin priming coat at 0.2kg/m2. Allow to dry for approximate 30 minutes.
- Mixing & Tooling: Stir thoroughly before use. Apply evenly using a brush, long-nap roller, or airless spray equipment.
- Recoating Interval: Apply the first coat undiluted and allow 4 to 8 hours drying time before applying the second coat crosswise (perpendicular to the first layer).
- Protection & Overcoating: Not designed for permanent direct UV exposure; apply a protective screed, topping, or tile finish over the cured membrane.
- Clean-up: Tools and equipment can be cleaned with clean water immediately after use.
Storage & Safety
- Shelf Life: 12 months from manufacture date in original, unopened, and undamaged sealed pails.
- Storage Conditions: Store in a ventilated, shaded, and dry environment.
- Safety Precautions: Standard PPE (gloves, eye protection, and protective masks) should be worn during application. In case of skin or eye contact, rinse thoroughly with clean water. Keep out of reach of children.
Inquiry - PENTENS T-100