PENTENS T-335 Flex Blue
Flexible Cementitious Waterproofing System
PENTENS T-335 Flex Blue is a premium, two-component polymer-modified flexible cementitious waterproofing slurry. Specially formulated with a distinctive blue color, it forms a seamless, crack-bridging, and water-impermeable elastomeric barrier designed for both interior and exterior submerged applications.Packing: 18.8kg
Part A: Liquid (5.8kg)
Part B: Powder (13kg)
Color: Blue (Provides clear visual coverage verification)
Product Overview
An advanced, two-component flexible cementitious waterproofing system engineered to withstand severe hydrostatic pressure, continuous wet environments, and structural movements. By combining flexible synthetic acrylic polymers with high-grade cementitious binders and quartz aggregates, it cures into a tough yet elastomeric membrane that bridges hairline cracks, prevents moisture osmosis, and provides outstanding chemical and physical adhesion to concrete and mineral substrates.
Key Advantages
- Built for Water Submersion: Engineered specifically for continuous water contact, making it ideal for swimming pools, retention tanks, and water features.
- High Flexibility & Crack Bridging: Accommodates thermal expansion, contraction, and structural movement while bridging dynamic hairline cracks.
- Visual Coverage Indicator: Blue color finish allows applicators to easily verify uniform thickness and identify any missed spots or voids during application.
- Excellent Adhesion: Bonds tenaciously to sound concrete, cement renders, screeds, and masonry substrates.
- Weather Resistance: Resists UV exposure, weathering degradation, and chemical attacks in demanding outdoor and underground conditions.
- Eco-Friendly & Safe: Water-based, low VOC, non-toxic, and safe for use around wet living zones and potable water structures.
Recommended Applications
- Swimming pools, water retention tanks, and fish ponds
- Bathrooms, toilets, kitchens, and wet internal areas
- Balconies, terraces, and exposed concrete roof slabs
- Basements, lift pits, and retaining walls
Coverage Rates
- Bathrooms, Balconies & Terraces: ~1.0kg/m² per coat (approx. 2.0kg/m² across 2 coats)
- Water Tanks, Swimming Pools & Hydrostatic Areas: ~1.5kg/m² per coat (approx. 3.0kg/m² across 2 coats)
Application & Working Guidelines
- Surface Preparation: Substrates must be solid, clean, dry, and cleared of dust, moss, oil, grease, and loose coatings. Repair structural cracks and honeycombing prior to coating.
- Mixing: Pour Part A (Liquid) into a clean mixing container, then slowly add Part B (Powder) while stirring continuously using a slow-speed mechanical mixer until a completely smooth, lump-free blue slurry is achieved.
- Pot Life: Approximately 30 to 45 minutes at 30°C (shorter under higher temperatures). Prepare only the amount that can be consumed within this timeframe.
- Application: Apply the first coat evenly onto the prepared surface using a stiff bristle brush, roller, or trowel. Allow 3 to 6 hours for the first coat to dry tack-free before applying the second coat crosswise (perpendicular to the first layer).
- Curing: Allow at least 24 to 48 hours for the coating to cure before carrying out water ponding tests, laying cement screeds, or direct tiling. Shield fresh applications from intense scorching sunlight, strong winds, and rain during the initial curing phase.
- Clean-up: Tools and equipment can be cleaned with clean water immediately after use. Cured material must be removed mechanically.
Storage & Safety
- Shelf Life: 12 months from manufacture date in original, unopened, and undamaged sealed pails.
- Storage Conditions: Store in a ventilated, shaded, and dry environment.
- Safety Precautions: Non-toxic formulation. Standard PPE (gloves, eye protection, and protective masks) should be worn during application. In case of skin or eye contact, rinse thoroughly with clean water. Keep out of reach of children.
Inquiry - PENTENS T-335 Flex Blue