PENTENS T-007
Cement Modifier & Waterproofing Primer
PENTENS is a 100% acrylic-based liquid emulsion engineered as a multi-purpose bonding agent, primer, and cement mortar modifier. It penetrates porous concrete to significantly upgrade the chemical, corrosion, moisture, and abrasion resistance of cement renders and mortars.Packing: 1kg / 4kg / 20kg
Form: Liquid
Color: White
Product Overview
A high-performance acrylic polymer modifier designed to enhance both fresh concrete mixes and porous mineral substrates prior to waterproofing or flooring works. Formulated for superior wetting and deep penetration, it locks down surface dust, creates a strong adhesion bridge between new and old concrete, and increases the mechanical strength and impermeability of cementitious mortars.
Key Advantages
- Deep Penetration & Strong Bonding: Excellent wetting and penetrating capabilities on porous concrete for ultimate inter-coat adhesion
- Waterproof & Food-Grade Safe: Forms a water-resistant barrier and is certified safe for use in contact with drinking water
- Chemical & Alkaline Resistance: Superior resistance against mild acids, alkalis, fats, oils, and de-icing salts
- Mechanical Enchancement: Significantly boosts compressive, tensile, flexural, impact, and abrasion resistance of screeds and renders
- Enchanced Durability: Prevents cracking, reduces dusting, and protects structures against long-term moisture degradation
Recommended Applications
- Waterproofing primer for water-based membranes, floor coatings, and acrylic paints
- Bonding agent and slurry interface between old concrete and new screeds
- Heavy-duty floor repair, patching, and resurfacing (factory floors, driveways, ramps)
- Angle fillets (coving) and structural joints
- Multi-purpose adhesive additive for mansory, tile fixing mortars, and renders
Coverage and Mixing Proportions
- As a Waterproofing Primer / Bonding Coat
- Dilute 1 part PENTENS T-007 to 3 parts clean water (1:3 by volume). Plaster or roll evenly onto the prepared surface (approximate 0.2kg / m2 dilute)
- As a Slurry Bonding Coat (1mm thick)
- Blend PENTENS T-007, water, cement, and fine sand to produce a brushable slurry
- As a Cement Modifier (Patch Repair & Screeding)
- Add PENTENS T-007 into standard cement-sand mortar to replace part of the gauging water for increased workability and flexural strength
Application & Working Guidelines
- Surface Preparation: All substrates must be sound, clean, and completely free from dirt, mold, grease, oil, and loose contaminants that could impair adhesion.
- Priming Work: Stir the 1:3 water dilution thoroughly. Apply an even, continuous coat using a roller, brush, or spray. Allow to penetrate and cure to a tack-free finish (approximate 30 minutes) before applying subsequent waterproofing layers or toppings.
- Application Temperature: Recommended application temperature is between 8°C and 40°C.
- Clean-up: Wash all tools and application equipment with clean water immediately after use. Cured material can only be removed mechanically.
Storage & Safety
- Shelf Life: 12 months from manufacture date, unopened packaging stored in a cool and dry area.
- Safety Precautions: Acrylic water-based formula. Standard PPE (gloves, eye protection, and protective clothing) should be worn during application. In case of contact with eyes, rinse immediately with plenty of clean water and seek medical attention if irritation persists. Keep out of reach of children.
Inquiry - PENTENS T-007