MAPEI Aquaflex Roof 77
Flexible Acrylic Waterproofing Coating
MAPEI Aquaflex Roof 77 is a ready-to-use, flexible, liquid-applied acrylic resin waterproofing membrane. It cures into a tough, seamless, and weather-resistant barrier engineered for exposed outdoor roofs, terraces, and external structural elements.Packing: 4kg / 18kg
Form: Emulsion / Paste
Color: Grey / White
Product Overview
A high-grade, single-component elastomeric liquid coating designed for direct atmospheric and solar exposure. It cures to create a continuous, joint-free waterproofing shield that bridges minor substrate movements, withstands tropical UV radiation, and provides an aesthetic, walkable finish capable of handling light foot traffic.
Key Advantages
- Superior UV & Weather Resistance: Formulated to withstand intense solar radiation, heavy rain, and extreme tropical weathering without degradation.
- Flexible & Elastic: Seamless elastomeric film accommodates thermal expansion and minor structural movement without cracking.
- Tack-Free & Walkable: Dries to a clean, non-sticky finish suitable for regular inspection and light foot traffic after 8 hours.
- Easy & Versatile Application: Smooth paste consistency applies effortlessly with a roller or brush over flat, sloped, curved, or irregular surfaces.
- Strong Bonding: Excellent adhesion across properly prepared concrete, mansory, metal, and existing tiled substrates.
- Eco-Friendly & Safe: Water-based, solvent-free, non-toxic, and user-friendly to apply across flat, sloped, or vertical substrates.
Recommended Applications
- Cementitious flat roofs, concrete roof decks, terraces, and balconies
- Car porch roofs and external canopies
- Cement tiles and clay roof tiles
- Metal profile and zinc sheet roofs
- Tiled floors (exterior balconies and terraces)
- Cupolas, domes, curved roofs, and complex architectural geometries
Coverage Rates
- Priming Coat: ~0.3kg/m² (thin coat diluted with clean water to prime porous surfaces)
- Neat Coats: ~0.6kg/m² per layer
Application & Working Guidelines
- Surface Preparation: Substrates must be solid, clean, dry, and cleared of dust, moss, oil, grease, and loose coatings. Repair structural cracks and honey combing prior to coating. Ensure surfaces have a minimum slope to promote positive drainage and avoid permanent water ponding.
- Priming: Apply a diluted priming coat of Aquaflex Roof 77 at ~0.3kg/m² and allow to dry thoroughly before proceeding with neat coats.
- Application & Mixing: Ready-to-use, stir gently until completely homogeneous. Apply evenly using a roller, brush, trowel, or airless spray.
- Recoating Interval: Allow approximately 2 to 4 hours of drying time between coats under standard conditions. Apply the second coat crosswise (perpendicular to the first layer).
- Curing: Ready for light foot traffic after approximately 8 hours. Protect from rain and standing water during the initial curing period.
- Working Temperature: Apply within an ambient and substrate temperature range of +5°C to +35°C. Do not apply if rain is imminent or relative humidity exceeds 85%.
- Clean-up: Tools and equipment can be cleaned with clean water immediately after use. Cured material must be removed mechanically.
Storage & Safety
- Shelf Life: 12 months from manufacture date in original, unopened, and undamaged sealed pails.
- Storage Conditions: Store in a ventilated, shaded, and dry environment.
- Safety Precautions: Non-toxic formulation. Standard PPE (gloves, eye protection, and protective masks) should be worn during application. In case of skin or eye contact, rinse thoroughly with clean water. Keep out of reach of children.
Inquiry - MAPEI Aquaflex Roof 77