Share:


MAPEI Primer G



MAPEI Primer G

Synthetic Resin-Based Water Dispersion Primer

MAPEI Primer G is a ready-to-use, synthetic resin-based water-dispersion primer designed to consolidate dusty surfaces and regulate substrate porosity. It forms a tough, flexible, and non-flammable protective film that prevents rapid moisture loss and dramatically enhances the bond strength of tile adhesives, self-levelling compounds, plasters, and wallpapers.

Packing: 5kg / 25kg
Form: Liquid

Product Overview
An ultra-low VOC, solvent-free synthetic polymer primer engineered for high-absorption and gypsum-based mineral surfaces. When applied, it penetrates deeply to bind loose surface dust and creates an essential chemical barrier that stops harmful reactions (such as ettringite formation) between gypsum sulphates and cementitious adhesives, ensuring long-lasting, delamination-free installations.

Key Advantages
  • Dust Consolidation & Porosity Control: Penetrates deeply to bind powdery surfaces and ensure uniform water absorption across porous substrates.
  • Prevents Chemical Reactions: Acts as a protective barrier on gypsum and anhydrite surfaces to prevent ettringite cracking when using cementitious adhesives.
  • Superior Bonding Strength: Maximizes adhesion for tile adhesives, self-levelling screeds, gypsum plasters, and decorative finishes.
  • Ultra-Low VOC & Eco-Friendly: Certified EMICODE EC1 Plus; solvent-free, non-flammable, low-odor, and safe for indoor environments.
  • Visual Coverage Verification: Light blue tint allows applicators to clearly inspect and confirm uniform, gap-free surface coverage.

Recommended Applications
  • Treating gypsum plaster, anhydrite screeds, and drywall/plasterboard panels prior to laying ceramic or stone tiles
  • Priming porous cementitious screeds and concrete floors before applying self-levelling compounds
  • Consolidating dusty or chalky cement renders and masonry walls prior to painting or wallpapering
  • Intermediate priming between smoothing layers and adhesive applications

Dilution Proportions
  • Gypsum / Anhydrite Substrates: Apply neat (undiluted) in a single uniform coat.
  • Porous Cementitious Screeds: Dilute 1 part Primer G to 1 part of clean water (1:1 ratio). 
  • Dusty / Absorbent Walls: Dilute 1 part Primer G to 1 part of clean water (1:3 ratio).
  • Consumption: Approximately 0.1kg to 0.2kg/m2 (depending on substrate absorption and dilution rate).

Application & Working Guidelines
  • Surface Preparation: Substrates must be structurally sound, dry, clean, and free of oil, grease, wax, old flaking paint, and loose debris. Remove any existing laitance or surface contaminants mechanically.
  • Mixing: Stir well before use. Dilute with clean water according to the specific substrate porosity and application requirements.
  • Application: Apply an even, continuous coat using a flat brush, short-nap roller, or spray equipment. Avoid pooling or puddling on the surface.
  • Drying Time:  Allow approximately 2 hours of drying time (at +23°C) until the primer dries to a transparent, tack-free blue film before applying tile adhesives, self-levelling compounds, or paints.
  • Working Temperature: Apply within an ambient and substrate temperature range of +5°C to +35°C.
  • Clean-up: Tools and equipment can be cleaned with clean water immediately after use. Cured material must be removed mechanically. 

Storage & Safety
  • Shelf Life: 24 months from manufacture date in original, unopened, and undamaged sealed pails.
  • Storage Conditions: Store in a ventilated, shaded, and dry environment.
  • Safety Precautions: Non-hazardous water-based dispersion. Standard PPE (gloves, eye protection, and protective masks) should be worn during application. In case of skin or eye contact, rinse thoroughly with clean water. Keep out of reach of children.


 Inquiry - MAPEI Primer G